Home | Products | Support | How to Order | Contact Us | Search  

The 61622 is still available, but is being phased out.  It has been replaced by the 62622.  
Please click here to go to the 62622 page.

TAMS 61622 Card for Windows XP, 2000 & NT4

Take advantage of the flexibility and versatility of GPIO with the speed of PCI.  

The TAMS 61622 card offers:

• Both 3.3V and 5V PCI support
• Software configuration - no DIP switches.
• 16 bit data exchange 
• Extra status and control lines
• Choice of handshake methods
• Data-latching options
• Selectable data width and polarity.

PCI - GPIO for Windows XP, 2000 & NT4

TAMS 61622 is based on HP’s original definition of the 98622 GPIO standard.  The TAMS card is a superset of the HP/Agilent interfaces and meets all the original specifications.  It can operate with the original code, but also adds the full functionality of the HP E2074/5 enhanced mode to give bi-directional data and auxiliary status and control lines.  Features bi-directional polling and configurable PCTL delay. You can use the TAMS card with any application that was developed for HP/Agilent cards.

System Requirements:

• Windows XP, 2000 or NT 4.0 

• 1 available PCI slot

• Agilent I/O Libraries for Windows  
  (The Agilent I/O Libraries for Windows were not included with the 61622.  Please see the SICL page for more info.

• The 61622 is recommended for uni-processor CPU configurations only.  Hyperthreading or multi-processor configurations must be disabled on Windows machines if card is installed.  (The new 62622 card fixed this problem.)

Software Compatibility:
Whether you are using HP-VEE, BASIC for Windows or programming in ‘C’ with the SICL library your code will run at full performance without modification. 

$98.00