TAMS

Home | Products | Support | How to Order | Contact Us | Search  
 

TAMS 62622 Card for Windows XP and 2000

Take advantage of the flexibility and versatility of GPIO with the speed of PCI.  

The TAMS 62622 card offers:

  • True 3.3V and 5V PCI support
  • Software configuration - no DIP switches.
  • 16 bit data exchange 
  • Extra status and control lines
  • Choice of handshake methods
  • Data-latching options
  • Selectable data width and polarity.
  • Easily removable pull-up resistors

PCI - GPIO for Windows XP & 2000

TAMS next generation PCI GPIO card, the 62622 now supports hyperthreading and  multi-processor configurations.  Based on HP’s original definition of the 98622 GPIO standard,  TAMS 62622 card is a superset of the HP/Agilent interfaces and meets all the original specifications.  You can use the TAMS 62622 card with any application that was developed for the 98622, E2074, or E2075 HP/Agilent cards or TAMS 60622 or 61622.

System Requirements:

Software Compatibility:
Whether you are using HP-VEE, BASIC for Windows or programming in ‘C’ with the SICL library your code will run at full performance. 
 
GPIO Card TAMS PCI GPIO Interface Card for Windows XP & 2000
Part #: 62622		 $625.00
GPIO Card 
with Bail Locks		 TAMS PCI GPIO Interface Card  for Windows XP & 2000
Same as above, but with bail lock cable attachment.
Part #: 62622-BAIL		   $625.00
GPIO Cable Compatible with all TAMS, HP and Agilent GPIO interfaces.
5 meter total length. 50 pin Centronics connector on one end, unterminated on the other end.  Includes mounting hardware kit
Part #: 622-001

$98.00

Support Info 62622 Drivers and Documentation
Physical Specifications 
Size 4.75" x 4.25" x 1" (150 x 155 x 24mm)
Weight (card only) 1.5 oz (42 mg)  
Shipping Weight 16 oz (455 mg)  
    

 Home | Products | Distributors | Support | Company Info | How to Order | Contact Us | Search
 
All referenced prices are United States Dollars.
Copyright © 1997-2006 Test & Measurement Systems Inc.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.  Specifications are subject to change without notice.

Test & Measurement Systems Inc.
750 14th Street SW
Loveland, CO 80537

Tel:  + 970-669-6553
Fax: + 970-669-3090
sales @ tamsinc.com

 

  February 06, 2007