TAMS 71622 PCI GPIO Card for HP-UX Workstations

TAMS 71622 Card PCI, GPIO for HP-UX Workstations

Take advantage of the flexibility and versatility of GPIO with the speed of PCI.

The TAMS 71622 card offers:

HP-UX 10.20 & 11i support
Both 3.3V and 5V PCI support
Software configuration - no DIP switches.
16 bit data exchange
Extra status and control lines
Choice of handshake methods
Data-latching options
Selectable data width and polarity.

PCI, GPIO Card for HP-UX

Price: $1,145.00

Enhanced Mode
The TAMS 71622 is based on HP’s original definition of the 98622 GPIO standard. The TAMS card meets all the original specifications, and can operate with the original code, but also adds the full functionality of the HP E2074/5 enhanced mode to give bi-directional data and auxiliary status and control lines. Features bi-directional polling and configurable PCTL delay. You can use the TAMS card with any application that was developed for HP / Agilent cards.

System Requirements

1 available PCI slot
HP Workstation running HP-UX 10.20 or HP-UX 11i
HP-UX 11i Version 1 TCOE (Technical Computing Operating Environment
or HP-UX 11i Version 1 MTOE (Minimal Technical Operating Environment
I/O Library for HP-UX

Software Compatibility
Whether you are using HP-VEE, BASIC/UX or programming in ‘C’ with the SICL library your code will run at full performance without modification. And thanks to HP’s software architecture once the TAMS driver is loaded, the TAMS card can be used in any application without requiring additional computer overhead or code changes.

GPIO Card	TAMS PCI GPIO Interface Card for HP-UX 10.20 & 11i Includes a License to Use TAMS I/O Libraries for 11i (72091-0700) Order cable and I/O library media CD separately. Part #: 71622	$1,145.00
GPIO Card with Bail Locks	TAMS PCI GPIO Interface Card with Bail Locks for HP-UX 10.20 & 11i Includes a License to Use TAMS I/O Libraries for 11i (72091-0700) Order cable and I/O library media CD separately. Part #: 71622-BAIL	$1,145.00
GPIO Cable	Compatible with all TAMS, HP and Agilent GPIO interfaces. 15 ft. (4.5 M) total length. 50 pin Centronics connector on one end, unterminated on the other end. Includes hardware kit Part #: 622-001	$98.00

All referenced prices are United States Dollars.
Copyright © 1997-2006 Test & Measurement Systems Inc.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Specifications are subject to change without notice.

Test & Measurement Systems Inc.
750 14th Street SW
Loveland, CO 80537

Tel: + 970-669-6553
Fax: + 970-669-3090
sales @ tamsinc.com


71622 Specifications
Interface Bus	3.3v or 5v PCI
Size	4.75" x 4.25" x 1"	(150 x 155 x 24 mm)
Weight (card only)	1.5 oz (42 mg)
Shipping Weight	16 oz (455 mg)


Home \| Products \| Support \| How to Order \| Contact Us \| Search