TAMS

Home | Products | Support | How to Order | Contact Us | Search  

PCI Express GPIB interfaces

PCIe is the next evolution of PCI.  It offers fast data transmission for demanding test applications.  Supported on both Red Hat Enterprise Linux and Windows, TAMS PCIe cards are also backward compatible with PCI software, so you don't need to re-configure any code.

PCIe GPIB Card
The next evolution GPIB

64488

P/N: 64488 for Windows
P/N: 84488 for Red Hat Linux

Price: $525.00

PCIe GPIB Low Profile Card
Perfect for a short case

64487

P/N: 64487 for Windows
P/N: 84487 for Red Hat Linux

Price: $525.00

PCIe Dual Head GPIB Card
Perfect if you are short on slots.

P/N: 65488 for Windows
P/N: 85488 for Red Hat Linux

Price: $995.00

General Requirements:
Minimum System Requirements: Windows Vista or XP
Red Hat Enterprise Linux (RHEL) (see supported kernels)
Software required: Windows: Agilent IO Libraries Suite 15 or higher
RHEL: TAMS IO Libraries for Linux 3.4 or higher (included)
  Agilent Vee Pro, TransEra HTBasic, TAMS BASIC for Linux
PCI Bus Slot 3.3 V PCI Express (PCIe)
Supported Standards: PCIe rev. 1.0a, IEEE-488.1, IEEE-488.2, RoHS

General Characteristics:
Connectors:

High density GPIB (ITT-Cannon 25 position Microminiature)
Maximum data rate: 1.4 MB/s or better
Maximum instrument connection 14 instruments - daisy chain via GPIB (x2 for x5488)
Warranty 1 year

Dimensions:

x4488
Size (w/o bracket) 13.3cm x 7cm
Packaged: 10" x 7.25" x 2"
Weight: 62.4 grams

x4487
Size (w/o bracket) 13.3cm x 7cm
Packaged 10" x 7.25" x 2"
Weight: 56.7 grams

x5488
Size (w/o bracket) 13.3cm x 9.4cm
Packaged 10" x 7.25" x 2"
Weight: 79.4 grams

Environmental Specifications:

Operating Environment: 0 C to 40 C
Storage Environment: -20 C to 55C
Humidity: Up to 90% at 40 C non-condensing
Storage Humidity: Up to 90% at 55 C non-condensing
Drivers:
  TAMS PCIe interfaes are software compatible with TAMS PCI interfaces.
Windows: XP & Vista
 RHEL: Included in the TAMS IO Library for Linux
TAMS 488 Cables:
Our cable is a high density connector on one end and a standard GPIB connector on the other.  Our card uses a smaller, high density connector so as to be in full compliance with the PCI specification.  A standard GPIB connector on a PCI card is actually wider than the PCI specification allows.  With a standard GPIB connector and cable, it is sometimes impossible to connect the cable to some computers.  The large connectors often interfere with the case or adjacent expansion slots.  This stresses the cable, card or connection. Our high density connector allows multiple cards to be installed in adjacent slots without cable interference or connection strain. 

TAMS HPIB cable with hi-density connector
HP-IB Cable with high density connector

488-001 2-meter $98.00
488-004 4-meter $135.00
488-006 6-meter $155.00

 Home | Products | Distributors | Support | Company Info | How to Order | Contact Us | Search
 
All referenced prices are United States Dollars.
Copyright © August, 2007 Test & Measurement Systems Inc.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.  Specifications are subject to change without notice.

Test & Measurement Systems Inc.
750 14th Street SW
Loveland, CO 80537

Tel:  + 970-669-6553
Fax: + 970-669-3090
sales @ tamsinc.com

October 2008